Skip to main content
Version: 3.8.x

JATOS Configuration

JATOS' properties can be configured in three different ways:

  1. via a config file (named jatos.conf or production.conf)
  2. via command-line arguments
  3. via environment variables (possible for only a few of the properties)

The config file is located in the JATOS folder under ./conf and is named jatos.conf for versions >= 3.8.3 and production.conf for versions < 3.8.3. It uses the HOCON format. Remember to always restart JATOS after making any changes to a config file.

Command-line argument names are usually the same as the names in the config file except that they are prefixed with -D (except JVM arguments that have a -J), e.g. jatos.urlBasePath and -Djatos.urlBasePath.

Command-line arguments can be appended to JATOS' loader.sh start command. E.g., here is the command with the two arguments -Djatos.urlBasePath and -Djatos.tmpPath:

./loader.sh start -Djatos.urlBasePath="/mybasepath/" -Djatos.tmpPath="/my/tmp/dir"

JVM arguments​

JVM arguments (arguments for the Java Virtual Machine) are special since they are not directly intended for JATOS but for the JVM running JATOS. They can only be specified via command line arguments and have to be prefixed with -J.

One commonly used JVM argument is -Xmx. It limits JATOS's memory usage (JVM's maximum heap memory usage to be precise). It has to be written as -J-Xmx, e.g. to allow 4GB memory -J-Xmx4G.

HTTP config​

Address and port​

By default JATOS binds to all locally available IP addresses including 127.0.0.1 on port 9000. Usually JATOS is installed together with a reverse proxy (e.g Nginx or Apache) but if you don't want to use a proxy, you have to set up the hostname or IP address and the port in one of the ways.

  1. Via config file properties

    • For v3.8.1 and lower) play.server.http.address and play.server.http.port
    • For v3.8.2 and higher) jatos.http.address and jatos.http.port

    Example:

    jatos.http.address = 1.2.3.4
    jatos.http.port = 80

  2. Via command-line arguments

    • For v3.8.1 and lower) -Dplay.server.http.address and -Dplay.server.http.port
    • For v3.8.2 and higher) -Djatos.http.address and -Djatos.http.port

    Example:

    -Djatos.http.address=1.2.3.4 -Djatos.http.port=80

Server idle timeout​

The idle timeout for an open connection after which it will be closed. Set to null or infinite to disable the timeout, but notice that this is not encouraged since timeouts are important mechanisms to protect your servers from malicious attacks or programming mistakes. Default is 75 seconds.

  1. Via config file property play.server.http.idleTimeout

    Example:

    play.server.http.idleTimeout = 100s

  2. Via command-line argument -Dplay.server.http.idleTimeout

    Example:

    -Dplay.server.http.idleTimeout=100s

Request timeout​

How long can a request take until it times out. Set to null or infinite to disable the timeout. Default is infinite.

  1. Via config file property play.server.akka.requestTimeout

    Example:

    play.server.akka.requestTimeout = 100s

  2. Via command-line argument -Dplay.server.akka.requestTimeout

    Example:

    -Dplay.server.akka.requestTimeout=100s

URL base path​

JATOS can be configured to use an base path. E.g we have the host www.example.org and let JATOS run under mybasepath so that all URLs start with www.example.org/mybasepath/.

The path always has to start and end with a "/". And keep in mind that if you add a base path to JATOS' URL you have to adjust all absolute paths to the study assets (in HTML and JavaScript files) too - or use relative paths (which is recommended anyway).

  1. Via config file properties

    • For v3.8.1 and lower) play.http.context
    • For v3.8.2 and higher) jatos.urlBasePath

    Example:

    jatos.urlBasePath = "/mybasepath/"

  2. Via command-line arguments

    • For v3.8.1 and lower) -Dplay.http.context
    • For v3.8.2 and higher) -Djatos.urlBasePath
    -Djatos.urlBasePath="/mybasepath/"

  3. Via environment variable JATOS_URL_BASE_PATH

    JATOS_URL_BASE_PATH="/mybasepath/"

X-Frame-Options header​

The X-Frame-Options header can be used to allow or disallow embedding a JATOS study in an iframe (or similar embedding techniques). Possible values are DENY (completely disallow iframes), SAMEORIGIN (embedding page has the same origin as the iframe), or null (allow iframes everywhere). By default it set to SAMEORIGIN.

  1. Via config file property play.filters.headers.frameOptions

    Example:

    play.filters.headers.frameOptions = null

  2. Via command-line argument -Dplay.filters.headers.frameOptions

    Example:

    -Dplay.filters.headers.frameOptions=null

Trusted certificates​

It's possible to add multiple certificates, e.g. for for encrypted LDAP. type can be PKCS12, JKS or PEM.

  1. Only via config file property play.ws.ssl.trustManager.stores

    play.ws.ssl.trustManager.stores = [ { type = "PEM", path = "conf/certs/ca.pem" } ]

Study assets root path​

The study assets root folder is the location where all study's HTML, JavaScript files etc. are stored. By default it is located in the JATOS folder and has the default name study_assets_root, except when JATOS runs in a Docker container, where it is under /opt/jatos_data/study_assets_root"

  1. Via config file property jatos.studyAssetsRootPath

    jatos.studyAssetsRootPath = "/path/to/my/assets/root/folder"

  2. Via command-line argument -Djatos.studyAssetsRootPath

    -Djatos.studyAssetsRootPath="/path/to/my/assets/root/folder"

  3. Via environment variable JATOS_STUDY_ASSETS_ROOT_PATH

    JATOS_STUDY_ASSETS_ROOT_PATH="/path/to/my/assets/root/folder"

Temporary directory path​

(Only in version >= 3.8.3)

JATOS uses a directory to temporarily store files, e.g. during study import. By default the system's temporary directory is used (on Linux/Unix /tmp or on Windows c:\temp), except when JATOS runs in a Docker container, when it is under /opt/jatos_data/tmp.

  1. Via config file property jatos.tmpPath

    jatos.tmpPath = "/my/tmp/dir"

  2. Via command-line argument -Djatos.tmpPath

    -Djatos.tmpPath="/my/tmp/dir"

  3. Via environment variable JATOS_TMP_PATH

    JATOS_TMP_PATH="/my/tmp/dir"

Application logs​

The application log records messages from the JATOS application. The application logs use a daily log rotation with a history of maximal 30 days.

Don't confuse the application logs with the study logs.

Application logs path​

The application logs are by default in the JATOS folder under ./logs.

  1. Via config file property jatos.logs.path

    jatos.logs.path = "/my/dir/logs"

  2. Via command-line argument -Djatos.logs.path

    -Djatos.logs.path="/my/dir/logs"

  3. Via environment variable JATOS_LOGS_PATH

    JATOS_LOGS_PATH="/my/dir/logs"

Application logs filename​

By default the logs filename is application (without suffix).

  1. Via config file property jatos.logs.filename

    jatos.logs.filename = "myFilename"

  2. Via command-line argument -Djatos.logs.filename

    -Djatos.logs.filename="myFilename"

  3. Via environment variable JATOS_LOGS_FILENAME

    JATOS_LOGS_FILENAME="myFilename"

Application logs appender​

The logs appender can be either ASYNCSTDOUT or ASYNCFILE. Default is ASYNCFILE. If you don't want to record the logs to a file but to stdout, change the value to ASYNCSTDOUT.

  1. Via config file property jatos.logs.appender

    jatos.logs.appender = ASYNCSTDOUT

  2. Via command-line argument -Djatos.logs.appender

    -Djatos.logs.appender=ASYNCSTDOUT

  3. Via environment variable JATOS_LOGS_APPENDER

    JATOS_LOGS_APPENDER=ASYNCSTDOUT

Study logs​

Every study stored in JATOS has its own study log (more info). Among other things, it calculates hashes of result data, which can be CPU-intensive, and on smaller machines it can be better to disable it.

Don't confuse the study logs with the application logs. .

Enable/disable study logging​

By default study logging is enabled.

  1. Via config file property jatos.studyLogs.enabled

    jatos.studyLogs.enabled = false

  2. Via command-line argument -Djatos.studyLogs.enabled

    -Djatos.studyLogs.enabled=false

Path to study logs​

By default the study logs are stored in the JATOS folder under ./study_logs.

  1. Via config file property jatos.studyLogs.path

    jatos.studyLogs.path = "/path/to/my/jatos_study_logs"

  2. Via command-line argument -Djatos.studyLogs.path

    -Djatos.studyLogs.path="/path/to/my/jatos_study_logs"

  3. Via environment variable JATOS_STUDY_LOGS_PATH

    JATOS_STUDY_LOGS_PATH="/path/to/my/jatos_study_logs"

Study members​

Allow all users that exist on a JATOS to be added at once as members of a study. Can be useful in small setups, e.g. for a lab installation. Default is false.

  1. Via config file property jatos.studyMembers.allowAddAllUsers

    jatos.studyMembers.allowAddAllUsers = true

  2. Via command-line argument -Djatos.studyMembers.allowAddAllUsers

    -Djatos.studyMembers.allowAddAllUsers=true

Results pagination​

Maximal number of results to be fetched from the DB at once. Default is 10.

  1. Via config file property jatos.maxResultsDbQuerySize

    jatos.maxResultsDbQuerySize = 5

  2. Via command-line argument -Djatos.maxResultsDbQuerySize

    -Djatos.maxResultsDbQuerySize=5

Result data​

Maximum size of the result data of one component run. Default is 5MB.

  1. Via config file property jatos.resultData.maxSize

    jatos.resultData.maxSize = 10MB

  2. Via command-line argument -Djatos.resultData.maxSize

    -Djatos.resultData.maxSize=10MB

Result file uploading​

During study runs it is possible to upload files to JATOS usually with results. This is an alternative to result data that are stored in the database. It is also possible to download previously uploaded files during a study run.

Enable/disable result file uploading​

Default is true (enabled).

  1. Via config file property jatos.resultUploads.enabled

    jatos.resultUploads.enabled = false

  2. Via command-line argument -Djatos.resultUploads.enabled

    -Djatos.resultUploads.enabled=false

Path to result files​

The path where JATOS stores the uploaded result files from study runs. By default they are stored in the JATOS folder under ./result_uploads.

  1. Via config file property jatos.resultUploads.path

    jatos.resultUploads.path = "/path/to/my/jatos_result_uploads"

  2. Via command-line argument -Djatos.resultUploads.path

    -Djatos.resultUploads.path="/path/to/my/jatos_result_uploads"

  3. Via environment variable JATOS_RESULT_UPLOADS_PATH

    JATOS_RESULT_UPLOADS_PATH="/path/to/my/jatos_result_uploads"

Max file size​

Specifies the maximum file size per uploaded file. Default is 30MB.

  1. Via config file property jatos.resultUploads.maxFileSize

    jatos.resultUploads.maxFileSize = 100MB

  2. Via command-line argument -Djatos.resultUploads.maxFileSize

    -Djatos.resultUploads.maxFileSize=100MB

  3. Via environment variable JATOS_RESULT_UPLOADS_MAX_FILE_SIZE

    JATOS_RESULT_UPLOADS_MAX_FILE_SIZE=100MB

All files size limit per study run​

Specifies the maximum file size of all files together that are uploaded during one study run. Default is 50MB.

  1. Via config file property jatos.resultUploads.limitPerStudyRun

    jatos.resultUploads.limitPerStudyRun = 100MB

  2. Via command-line argument -Djatos.resultUploads.limitPerStudyRun

    -Djatos.resultUploads.limitPerStudyRun=100MB

  3. Via environment variable JATOS_RESULT_UPLOADS_LIMIT_PER_STUDY_RUN

    JATOS_RESULT_UPLOADS_LIMIT_PER_STUDY_RUN=100MB

Superuser​

The Superuser role can be granted to a user and it allows this user to access ANY study on this JATOS as if they were a member of this study. This includes accessing the result data and even deleting the study itself. This can be useful in small setups, e.g. for a lab installation or if there is a dedicated person responsible for running online studies. Default is false.

If set to true an user with the Admin role can grant the role Superuser to any user.

  1. Via config file property jatos.user.role.allowSuperuser

    jatos.user.role.allowSuperuser = true

  2. Via command-line argument -Djatos.user.role.allowSuperuser

    -Djatos.user.role.allowSuperuser=true

LDAP authentication​

At the moment LDAP users still have to be created manually in JATOS' User manager (with the checkbox LDAP turned on). Only the authentication is done via LDAP.

If your LDAP server uses encryption, you have to add your certificate to JATOS' trusted certificates defined with play.ws.ssl.trustManager.stores (only possible in a config file). E.g., if your certificate's location is in /jatos/conf/certs/ca.pem, then use the following to add it:

play.ws.ssl.trustManager.stores = [
    { type = "PEM", path = "/jatos/conf/certs/ca.pem" }
    { path: ${java.home}/lib/security/cacerts, password = "changeit" }
]

The first line adds your certificate (type can be PKCS12, JKS or PEM). The second line adds Java's default key store. Its default password is "changeit" (don't change it).

LDAP URL​

Specifies URL of the LDAP server. Not set or an empty string disables authentication via LDAP. Default is empty ("").

  1. Via config file property jatos.user.authentication.ldap.url

    jatos.user.authentication.ldap.url = "ldap://my.ldap.org:389"

  2. Via command-line argument -Djatos.user.authentication.ldap.url

    -Djatos.user.authentication.ldap.url="ldap://my.ldap.org:389"

LDAP base DN​

Specifies the base DN (distinguished name). It can be one DN with a single string (e.g. "ou=students,dc=example,dc=com") or a list of DNs in squared brackets (e.g. ["ou=students,dc=example,dc=com", "ou=scientists,dc=example,dc=com"]). Not set or an empty string disables authentication via LDAP. Default is empty ("").

  1. Via config file property jatos.user.authentication.ldap.basedn

    jatos.user.authentication.ldap.basedn = "dc=example,dc=com"

  2. Via command-line argument -Djatos.user.authentication.ldap.basedn

    -Djatos.user.authentication.ldap.basedn="dc=example,dc=com"

LDAP admin DN and password​

Specifies an DN (distinguished name) and password of an (optional) admin user that has the right to search for other users. Some LDAP servers need this, if it is impossible to bind directly to an uid. Not set or an empty string means no admin user is needed. Default is empty ("").

  1. Via config file properties jatos.user.authentication.ldap.admin.dn and jatos.user.authentication.ldap.admin.password

    jatos.user.authentication.ldap.admin.dn = "cn=read-only-admin,dc=example,dc=com"
    jatos.user.authentication.ldap.admin.password = "mypassword"

  2. Via command-line arguments -Djatos.user.authentication.ldap.admin.dn and -Djatos.user.authentication.ldap.admin.password

    -Djatos.user.authentication.ldap.admin.dn="cn=read-only-admin,dc=example,dc=com"
    -Djatos.user.authentication.ldap.admin.password="mypassword"

LDAP timeout​

Time in milliseconds JATOS waits for a response from your LDAP server. Default is 5000 ms.

  1. Via config file property jatos.user.authentication.ldap.timeout

    jatos.user.authentication.ldap.timeout = 10000

  2. Via command-line argument -Djatos.user.authentication.ldap.timeout

    -Djatos.user.authentication.ldap.timeout=10000

Google Sign-In​

JATOS users can be authenticated by Google Sign-in. Not set or an empty string disables authentication via Google Sign-In. Default is empty ("").

Specifies the Google API client ID.

  1. Via config file property jatos.user.authentication.oauth.googleClientId

    jatos.user.authentication.oauth.googleClientId = "1234567890-abc123abc123.apps.googleusercontent.com"

  2. Via command-line argument -Djatos.user.authentication.oauth.googleClientId

    -Djatos.user.authentication.oauth.googleClientId="1234567890-abc123abc123.apps.googleusercontent.com"

OpenID Connect (OIDC) authentication​

(Only in version >= 3.8.5)

JATOS users can be authenticated by OIDC sign-in.

OIDC discovery URL​

Specifies the OIDC provider's discovery URL. It usually ends in .well-known/openid-configuration.

  1. Via config file property jatos.user.authentication.oidc.discoveryUrl

    jatos.user.authentication.oidc.discoveryUrl = "http://myOidcProvider/.well-known/openid-configuration"

  2. Via command-line argument -Djatos.user.authentication.oidc.discoveryUrl

    -Djatos.user.authentication.oidc.discoveryUrl="http://myOidcProvider/.well-known/openid-configuration"

OIDC client ID​

Specifies the OIDC client ID. Not set or an empty string disables authentication via OIDC Sign-In. Default is empty ("").

  1. Via config file property jatos.user.authentication.oidc.clientId

    jatos.user.authentication.oidc.clientId = "myClientId"

  2. Via command-line argument -Djatos.user.authentication.oidc.clientId

    -Djatos.user.authentication.oidc.clientId="myClientId"

OIDC client secret​

Specifies the OIDC client secret. This is optional and can be left empty ("").

  1. Via config file property jatos.user.authentication.oidc.clientSecret

    jatos.user.authentication.oidc.clientSecret = "myClientSecret"

  2. Via command-line argument -Djatos.user.authentication.oidc.clientSecret

    -Djatos.user.authentication.oidc.clientSecret="myClientSecret"

OIDC ID token signing algorithm​

Specifies the OIDC ID token signing algorithm. Default is RS256.

  1. Via config file property jatos.user.authentication.oidc.idTokenSigningAlgorithm

    jatos.user.authentication.oidc.idTokenSigningAlgorithm = "ES512"

  2. Via command-line argument -Djatos.user.authentication.oidc.idTokenSigningAlgorithm

    -Djatos.user.authentication.oidc.idTokenSigningAlgorithm="ES512"

OIDC sign-in button text​

Specifies the text of the OIDC sign-in button on the login page. Default is Sign in with OIDC.

  1. Via config file property jatos.user.authentication.oidc.signInButtonText

    jatos.user.authentication.oidc.signInButtonText = "Sign in with ABC university"

  2. Via command-line argument -Djatos.user.authentication.oidc.signInButtonText

    -Djatos.user.authentication.oidc.signInButtonText="Sign in with ABC university"

Specifies the URL of a logo that can be used instead of the standard OIDC logo, e.g. a university logo. Default is the OIDC logo.

  1. Via config file property jatos.user.authentication.oidc.signInButtonLogoUrl

    jatos.user.authentication.oidc.signInButtonLogoUrl = "http://somedomain/logo.svg"

  2. Via command-line argument -Djatos.user.authentication.oidc.signInButtonLogoUrl

    -Djatos.user.authentication.oidc.signInButtonLogoUrl="http://somedomain/logo.svg"

OIDC success feedback​

Specifies the text of a message that is shown after a successful sign-in. If left empty ("") no message is shown. Default is "".

  1. Via config file property jatos.user.authentication.oidc.successFeedback

    jatos.user.authentication.oidc.successFeedback = "You successfully signed in with ABC university"

  2. Via command-line argument -Djatos.user.authentication.oidc.successFeedback

    -Djatos.user.authentication.oidc.successFeedback="You successfully signed in with ABC university"

ORCID (orcid.org) authentication​

(Only in version >= 3.8.5)

JATOS users can be authenticated by ORCID sign-in. Internally ORCID uses OpenId Connect.

ORCID client ID​

Specifies your ORCID client ID.

  1. Via config file property jatos.user.authentication.orcid.clientId

    jatos.user.authentication.orcid.clientId = "APP-ABCDEFGHIJKLMNOP"

  2. Via command-line argument -Djatos.user.authentication.orcid.clientId

    -Djatos.user.authentication.orcid.clientId="APP-ABCDEFGHIJKLMNOP"

ORCID client secret​

Specifies your ORCID client secret.

  1. Via config file property jatos.user.authentication.orcid.clientSecret

    jatos.user.authentication.orcid.clientSecret = "1234abcd-12ab-12ab-12ab-123456abcdef"

  2. Via command-line argument -Djatos.user.authentication.orcid.clientSecret

    -Djatos.user.authentication.orcid.clientSecret="1234abcd-12ab-12ab-12ab-123456abcdef"

User password restrictions​

By default JATOS' keeps it simple and relies on the users to choose save passwords: it just enforces a length of at least 7 characters. But this can be changed with the following two properties.

Password length​

  1. Via config file property jatos.user.password.length

    jatos.user.password.length = 8

  2. Via command-line argument -Djatos.user.password.length

    -Djatos.user.password.length=8

Password strength​

Can be one of the following. Default is 0.

  • 0 - No restrictions on characters
  • 1 - At least one Latin letter and one number
  • 2 - At least one Latin letter, one number and one special character (out of #?!@$%^&*-)
  • 3 - At least one uppercase Latin letter, one lowercase Latin letter, one number and one special character (out of #?!@$%^&*-)

  1. Via config file property jatos.user.password.strength

    jatos.user.password.strength = 3

  2. Via command-line argument -Djatos.user.password.strength

    -Djatos.user.password.strength=3

Database​

See JATOS with MySQL.

Old style database properties beginning with db.default are deprecated and the new properties beginning with jatos.db should be used instead.

Database URL​

  1. Via config file property jatos.db.url

    jatos.db.url = "jdbc:mysql://127.0.0.1:3306/jatos?characterEncoding=UTF-8&useJDBCCompliantTimezoneShift=true&useLegacyDatetimeCode=false&serverTimezone=UTC"

  2. Via command-line argument -Djatos.db.url

    -Djatos.db.url="jdbc:mysql://127.0.0.1:3306/jatos?characterEncoding=UTF-8&useJDBCCompliantTimezoneShift=true&useLegacyDatetimeCode=false&serverTimezone=UTC"

  3. Via environment variable JATOS_DB_URL

    JATOS_DB_URL="jdbc:mysql://127.0.0.1:3306/jatos?characterEncoding=UTF-8&useJDBCCompliantTimezoneShift=true&useLegacyDatetimeCode=false&serverTimezone=UTC"

Username and password​

  1. Via config file properties jatos.db.username and jatos.db.password

    jatos.db.username = "myusername"
    jatos.db.password = "mypassword"

  2. Via command-line argument -Djatos.db.username and -Djatos.db.password

    -Djatos.db.username = "myusername" -Djatos.db.password = "mypassword"

  3. Via environment variable JATOS_DB_USERNAME and JATOS_DB_PASSWORD

    JATOS_DB_USERNAME="myusername"
    JATOS_DB_PASSWORD="mypassword"

Database driver​

For modern MySQL or MariaDB databases this property needs to be set to com.mysql.cj.jdbc.Driver.

  1. Via config file property jatos.db.driver

    jatos.db.driver = "com.mysql.cj.jdbc.Driver"

  2. Via command-line argument -Djatos.db.driver

    -Djatos.db.driver="com.mysql.cj.jdbc.Driver"

  3. Via environment variable JATOS_DB_DRIVER

    JATOS_DB_DRIVER="com.mysql.cj.jdbc.Driver"

Multi-node mode​

If you intend to run JATOS on multiple machines in parallel in a cluster you have to set this property to true. Default is false.

  1. Via config file property jatos.multiNode

    jatos.multiNode = true

  2. Via command-line argument -Djatos.multiNode

    -Djatos.multiNode = true

User session configuration​

Timeout​

User session timeout in minutes. Default is 1440 minutes (1 day).

  1. Via config file property jatos.userSession.timeout

    jatos.userSession.timeout = 180

  2. Via command-line argument -Djatos.userSession.timeout

    -Djatos.userSession.timeout = 180

Inactivity timeout​

User session timeout after inactivity in minutes. Default is 60 minutes.

  1. Via config file property jatos.userSession.inactivity

    jatos.userSession.inactivity = 120

  2. Via command-line argument -Djatos.userSession.inactivity

    -Djatos.userSession.inactivity=120

Secure session​

This property can be used to restrict user access to HTTPS. Default is false.

  1. Via config file property play.http.session.secure

    play.http.session.secure = true

  2. Via command-line argument -Dplay.http.session.secure

    -Dplay.http.session.secure=true

ID cookies​

Secure ID cookies​

This property can be used to restrict participant access to HTTPS. Sets the ID cookie's secure attribute. Default is false.

  1. Via config file property jatos.idCookies.secure

    jatos.idCookies.secure = true

  2. Via command-line argument -Djatos.idCookies.secure

    -Djatos.idCookies.secure=true

SameSite attribute​

Defines the IDCookies' SameSite attribute. Possible values are None, Lax, or Strict. Setting to Strict makes the usage of external recruiting tools, like MTurk, impossible. Default is None.

  1. Via config file property jatos.idCookies.sameSite

    jatos.idCookies.sameSite = "Lax"

  2. Via command-line argument -Djatos.idCookies.sameSite

    -Djatos.idCookies.sameSite = "Lax"

PID file location​

Defines the location of the PID file in the file system.

  1. Via config file property play.pidfile.path

    play.pidfile.path = "/var/run/jatos.pid"

  2. Via command-line argument -Dplay.pidfile.path

    -Dplay.pidfile.path = "/var/run/jatos.pid"

Home page​

Welcome message​

Specifies a URL that can be used by JATOS to fetch some static HTML. This HTML will then be shown on the home page instead of the default welcome message (more info). If left empty ("") the default welcome message is shown. Default is empty.

  1. Via config file property jatos.brandingUrl

    jatos.brandingUrl = "https://mydomain.com/foobar-university-welcome-page.html"

  2. Via command-line argument -Djatos.brandingUrl

    -Djatos.brandingUrl = "https://mydomain.com/foobar-university-welcome-page.html"

'Terms of use' info box​

Specifies a URL link to the 'terms of use' that will be shown in an info box on the home page. If left empty ("") the info box is not shown. Default is empty.

  1. Via config file property jatos.termsOfUseUrl

    jatos.termsOfUseUrl = "https://mydomain.com/my-terms-of-use.html"

  2. Via command-line argument -Djatos.termsOfUseUrl

    -Djatos.termsOfUseUrl = "https://mydomain.com/my-terms-of-use.html"

Study administration page​

Enable/disable some columns in the study administration table. Sometimes the calculation of those columns takes too much time due to a slow database or file system.

  1. Via config file properties jatos.studyAdmin.showStudyAssetsSize, jatos.studyAdmin.showResultDataSize, and jatos.studyAdmin.showResultFileSize

    jatos.studyAdmin.showStudyAssetsSize = false # Default is true
    jatos.studyAdmin.showResultDataSize = true # Default is false
    jatos.studyAdmin.showResultFileSize = true # Default is false

  2. Via command-line arguments -Djatos.studyAdmin.showStudyAssetsSize, -Djatos.studyAdmin.showResultDataSize, and -Djatos.studyAdmin.showResultFileSize

    -Djatos.studyAdmin.showStudyAssetsSize = false # Default is true
    -Djatos.studyAdmin.showResultDataSize = true # Default is false
    -Djatos.studyAdmin.showResultFileSize = true # Default is false

JATOS API​

Enable/disable the JATOS API. By default it is enabled (true).

  1. Via config file property jatos.api.allowed

    jatos.api.allowed = false

  2. Via command-line argument -Djatos.api.allowed

    -Djatos.api.allowed = false